CUSTOMIZE PARAMETERS
PROCEDURE
1. CUSTOMIZE AIR CONDITIONING SYSTEM
(a) Customizing with the Techstream
NOTICE:
HINT:
The following items can be customized.
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Air Conditioner.
(5) Select the setting by referring to the table below.
Air Conditioner
Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
DEF (PSW/Lock) Mode Setting |
Link |
When pressure switch ON or the compressor lock is generated, the function to switch to air automatically is stopped. |
Link or Normal |
Air Conditioning Amplifier Assembly |
Set Temperature Shift |
Normal |
Function to perform control with the shifted temperature versus the displayed temperature |
-2C, -1C, Normal, +1C, +2C |
Air Conditioning Amplifier Assembly |
Compressor Mode |
Automatic |
Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off |
Automatic or Manual |
Air Conditioning Amplifier Assembly |
Air Inlet Mode*1 |
Automatic |
In case of turning the A/C on to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode |
Automatic or Manual |
Air Conditioning Amplifier Assembly |
Foot/DEF Auto Mode |
ON |
Function to turn the airflow to FOOT/DEF automatically when AUTO mode is on |
ON or OFF |
Air Conditioning Amplifier Assembly |
Foot/DEF Automatic Blow Up Function |
ON |
Function to increase the blower level automatically when the defroster is on |
ON or OFF |
Air Conditioning Amplifier Assembly |
Fan speed increment control |
Normal |
Function to define how fast the AC blower goes to target speed when first activating the air conditioning |
Slow, Normal, Fast |
Air Conditioning Amplifier Assembly |
Outside Air Mode Auto Switch Function |
ON |
Function to automatically change the air inlet to FRESH mode when the vehicle is parked |
ON or OFF |
Air Conditioning Amplifier Assembly |
(b) Customizing using the Navigation receiver assembly (for Navigation Receiver Type)
(1) Turn the ignition switch to ON.
(2) Enter the following menus: APPS / Setup / Vehicle / Vehicle Customization / Climate Settings.
(3) Select the setting by referring to the table below.
Climate Settings
Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
Auto A/C Mode |
On |
Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off |
On or Off |
Air Conditioning Amplifier Assembly |
Efficient Ventilation Mode |
On |
In case of turning the A/C on to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode |
On or Off |
Air Conditioning Amplifier Assembly |
(c) Customizing using the Radio and display receiver assembly (for Radio and Display Type)
(1) Turn the ignition switch to ON.
(2) Enter the following menus: SETUP / General / Vehicle / Vehicle customization / Climate settings.
(3) Select the setting by referring to the table below.
Climate settings
Display |
Default |
Content |
Setting |
Relevant ECU |
---|---|---|---|---|
Auto A/C Mode |
On |
Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off |
On or Off |
Air Conditioning Amplifier Assembly |
Efficient Ventilation Mode |
On |
In case of turning the A/C on to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode |
On or Off |
Air Conditioning Amplifier Assembly |
Vehicle Speed Sensor (C1A45)
DESCRIPTION
The blind spot monitor sensor receives vehicle speed signals from the skid control
ECU (brake actuator assembly) via CAN communication.
DTC Code
DTC Detection Condition
Trouble Area
C1A45
A fail flag is transmitted from the ...
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Manual Transmission System
DTC Code
Detection Item
MIL
Memory
See page
P03352A
Crankshaft Position Sensor "A" Signal Stuck in Range
Does not come on
DTC ...
Installation
INSTALLATION
PROCEDURE
1. INSTALL COOLER CONDENSER ASSEMBLY
(a) Engage the 2 claws to install the 2 condenser upper brackets.
(b) Engage the 2 claws to install the 2 condenser lower brackets.
(c) Lift the cooler condenser assembly up from the rear side of the vehicle,
and install ...